HuicenElevator small conveyorInspection and replacement operation

When using the hydraulic lifting platform， it is also necessary to check whether there is overheating， because the equipment is equipped with a motor. If the motor is overheated， it may cause damage to the motor， and it is expensive to replace a motor. Therefore， in the process of driving or test run，elevator if the motor is overheated，SivitohilovichElevator for ball screwHow to better maintain it it should be stopped immediately， and then check and eliminate the fault that causes the motor to overheat， Then you can continue to use the machine.

3The main structure and use of the guideway elevator are closed gear transmission. The big and small gears are made of steel， which are soft tooth surface after quenching and tempering treatment. Because the common failure form of the closed soft tooth surface gear transmission is tooth surface pitting， the design is calculated according to the contact fatigue strength of the tooth surface and checked according to the bending fatigue strength of the tooth root. The support bracket is used to fix and support all mechanical parts and some electrical components inside the lifting case. It is mainly welded from side plates， connecting tubes， connecting pieces and other parts. The materials are selected， including the thickness of both sides of the plate. At the same time， in order to reduce the weight of the support，elevator many process holes are designed on both sides of the plate. The worm gear and worm mechanism has the advantages of large transmission ratio， compact structure small impact load， and has the characteristics of reverse self-locking. It can ensure that the transmission mechanism can lock itself when the motor is powered off during the handling of patients， so the worm gear reducer is selected. The involute worm is made of steel， and its spiral surface is quenched to improve transmission efficiency and wear resistance. The worm gear is made of polyformaldehyde. Plastic worm gear has the advantages of good processing economy， stable transmission， vibration absorption and noise reduction， light weight wear resistance and self-lubrication， which makes the design of elevator more humanized.

cHuicenThe loading and unloading mobile boarding bridge has become a very visible structural form in modern logistics sites. It is the starting point and end point of the enterprise logistics chain， and a loading and unloading operation platform for enterprises to quickly and turnover products and goods. The height of the loading and unloading operation platform is fixed，elevator but the height of the carriage to and from the ground does not always form a certain height difference or gap between the transport vehicle and the loading and unloading platform. As a result， the forklift can not enter and exit the transport vehicle to directly load and unload goods. Use the boarding bridge to provide reliable connection. It enables the forklift truck to enter and exit the transport vehicle quickly for loading and unloading.

Double-column aluminum alloy lifting platform is beautiful and generous in design. It is made of high-strength aluminum alloy material，SivitohilovichElevator for ball screwHow to better maintain it with large bearing capacity. The height is generally -m， and the load is kg-kg. Large table design allows one or two people to work at the same time.

TGrubokoyePurpose of stage elevator: the telescopic stage adopts an effective guiding system， which makes the gap between the telescopic stage and the fixed stage small， stable and stepless in speed during the translation process. The synchronous device is driven by low speed and large torque， free and telescopic in place during the telescopic process， and can automatically realize leveling. It is suitable for cultural and entertainment places such as halls， theaters， multi-function halls，Lift_ Hydraulic elevator_ Hydraulic lift_ Hydraulic lifting platform - lift manufacturer studios， cultural stadiums， hotels， etc.

PpWhat are the safety tools explosion-proof valves on mobile elevators? They are often seen in large hydraulic equipment， especially heavy equipment. The main effect is to avoid the problems of equipment caused by oil circuit cracking or excessive oil pressure. The installation of small elevator explosion-proof valves depends on the needs of customers， but large equipment basically needs to be installed.

Generally， check the connection of each part， and tighten it if it is loose. The tightness of the connecting bolts of the engine body shall be checked when the engine body is under pressure. All connecting shafts must have cotter pins and shall be fully expanded.

The check valve is damaged. The check valve is designed to prevent oil return. If there is a problem， some oil will return， so it can be replaced at this time.

mFour-pillar aluminum alloy elevator: the whole is made of high-strength aluminum profiles. Due to the high strength of the profiles， the four-mast structure is adopted， which has excellent stability， flexible operation large load capacity， large platform area and convenient implementation. Its appearance can exert high lifting capacity in a small space. Make the deflection and swing of the lifting table very small.

CCheck the circuit breaker and motor wiring.

VEnergy costsPurpose of stage elevator: the telescopic stage adopts an effective guiding system， which makes the gap between the telescopic stage and the fixed stage small， stable and stepless in speed during the translation process. The synchronous device is driven by low speed and large torque， which makes the stage parallel， free and telescopic in place during the telescopic process， and can automatically realize leveling. It is suitable for cultural and entertainment places such as halls， theaters， multi-function halls， studios cultural stadiums， hotels， etc.

dVThe hydraulic torque converter and compensation system of mobile elevator are defective， such as the hydraulic torque converter is weak， the power shift fails， the oil temperature is too high， the hydraulic torque converter is weak， the hydraulic oil quantity is insufficient， the pressure is not adjusted properly， the amount is used， the torque converter pressure regulating valve， the back pressure valve and the set pressure value of the power shift fail， the quick-return valve， the pressure reducing valve the power transmission valve The reversing valve is jammed and internally leaked. The oil pollution is serious. Check the cause of valve jamming and make corresponding elimination， filter or replace the hydraulic oil. If the oil temperature rises too high， check whether the cooler is defective. Check the hydraulic oil quality. The brand hydraulic boarding bridge is also known as the hydraulic loading and unloading platform. It can realize the rapid loading and unloading of the goods. It is simple in structure design， flexible and convenient in use， high in efficiency， and is widely usedPopularize in the market.

The hydraulic oil should be kept clean and replaced every months; When maintaining and cleaning the elevator， be sure to support the brace.

Pay attention to heat dissipation when the motor works in hot environment.

Meticulous workmanshipmThe cleanliness of the hydraulic station is an important aspect of the lift hydraulic station， so it should not be careless. In addition， from a professional point of view， there are relevant rules and requirements. You should refer to the specification manual so that you can have a correct understanding and know how to achieve a better cleanliness.

WLift the cage with a crane and make the cage accurately positioned from above the standard section; Put the two lifting cages on the guide rail frame and slowly place them on the buffer spring. Prepare the drive frame of the two lifting cages， and adjust the back wheels and rollers to the position with large clearance to facilitate the installation of the drive frame. Use the lifting equipment to install a standard section for the basic part of the lift and tighten the connecting bolts. Use the lifting equipment to install the two sets of drive frames on the top of the respective lifting cage and put the connecting pins through， and install the cage top guardrail.

The routine maintenance of guideway lifting equipment should pay attention to regular inspection and maintenance， eliminate hidden dangers and eliminate faults， which are good for improving work efficiency， extending the service life of the equipment and ensuring the safety performance of the elevator.

fHuicenIn addition， it is necessary to ensure the quality of hydraulic oil when filling hydraulic oil， because some hydraulic oil manufacturers will choose hydraulic oil with poor quality. Such hydraulic oil as hydraulic lifting platform can not play any role in the folding boom elevator， but also affect the working efficiency of the folding boom elevator due to deterioration.

iMPerformance of manual hydraulic lifting platform: the manual hydraulic platform car is made of high-strength steel， with a reasonable and compact design structure， safe， stable and reliable. It is equipped with a safety valve， a fully sealed oil cylinder， which is easy to operate. The guide wheel is equipped to save the operators physical strength and protect the load wheel and the pallet load wheel. Unique hydraulic pump design， easy to start， designed to maintain an ideal height for the loading and unloading operation of the assembly line; With the unique design concept